turningˈtɜr nɪŋ
turn (v)
- present
- turns
- past
- turned
- past participle
- turned
- present participle
- turning
turning (n)
- plural
- turnings
English Definitions:
turn, turning (noun)
the act of changing or reversing the direction of the course
"he took a turn to the right"
turning (noun)
act of changing in practice or custom
"the law took many turnings over the years"
turning (noun)
a shaving created when something is produced by turning it on a lathe
turning, turn (noun)
a movement in a new direction
"the turning of the wind"
turning (noun)
the end-product created by shaping something on a lathe
turning (noun)
the activity of shaping something on a lathe
turning (Noun)
A turn or deviation from a straight course.
turning (Noun)
A shaping of wood or metal on a lathe.
turning (Noun)
Shavings produced by turning something on a lathe.
Turning
Turning is a machining process in which a cutting tool, typically a non-rotary tool bit, describes a helical toolpath by moving more or less linearly while the workpiece rotates. The tool's axes of movement may be literally a straight line, or they may be along some set of curves or angles, but they are essentially linear. Usually the term "turning" is reserved for the generation of external surfaces by this cutting action, whereas this same essential cutting action when applied to internal surfaces is called "boring". Thus the phrase "turning and boring" categorizes the larger family of processes. The cutting of faces on the workpiece, whether with a turning or boring tool, is called "facing", and may be lumped into either category as a subset. Turning can be done manually, in a traditional form of lathe, which frequently requires continuous supervision by the operator, or by using an automated lathe which does not. Today the most common type of such automation is computer numerical control, better known as CNC.
Turning
Turning is a machining process in which a cutting tool, typically a non-rotary tool bit, describes a helix toolpath by moving more or less linearly while the workpiece rotates. Usually the term "turning" is reserved for the generation of external surfaces by this cutting action, whereas this same essential cutting action when applied to internal surfaces (holes, of one kind or another) is called "boring". Thus the phrase "turning and boring" categorizes the larger family of processes known as lathing. The cutting of faces on the workpiece, whether with a turning or boring tool, is called "facing", and may be lumped into either category as a subset. Turning can be done manually, in a traditional form of lathe, which frequently requires continuous supervision by the operator, or by using an automated lathe which does not. Today the most common type of such automation is computer numerical control, better known as CNC. (CNC is also commonly used with many other types of machining besides turning.) When turning, the workpiece (a piece of relatively rigid material such as wood, metal, plastic, or stone) is rotated and a cutting tool is traversed along 1, 2, or 3 axes of motion to produce precise diameters and depths. Turning can be either on the outside of the cylinder or on the inside (also known as boring) to produce tubular components to various geometries. Although now quite rare, early lathes could even be used to produce complex geometric figures, even the platonic solids; although since the advent of CNC it has become unusual to use non-computerized toolpath control for this purpose. The turning processes are typically carried out on a lathe, considered to be the oldest of machine tools, and can be of different types such as straight turning, taper turning, profiling or external grooving. Those types of turning processes can produce various shapes of materials such as straight, conical, curved, or grooved workpieces. In general, turning uses simple single-point cutting tools. Each group of workpiece materials has an optimum set of tool angles that have been developed through the years. The bits of waste metal from turning operations are known as chips (North America), or swarf (Britain). In some areas they may be known as turnings. The tool's axes of movement may be literally a straight line, or they may be along some set of curves or angles, but they are essentially linear (in the non mathematical sense). A component that is subject to turning operations can be termed as a “Turned Part” or “Machined Component”. Turning operations are carried out on a lathe machine which can be manually or CNC operated.
Citation
Use the citation below to add this dictionary page to your bibliography:
Style:MLAChicagoAPA
"turning." Kamus.net. STANDS4 LLC, 2024. Web. 24 Apr. 2024. <https://www.kamus.net/english/turning>.
Discuss this bahasa indonesia turning translation with the community:
Report Comment
We're doing our best to make sure our content is useful, accurate and safe.
If by any chance you spot an inappropriate comment while navigating through our website please use this form to let us know, and we'll take care of it shortly.
Attachment
You need to be logged in to favorite.
Log In